Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)
CatEye Auto Technology in a small visible package. The TL-AU165 automatically turns on and starts flashing when darkness and motion are detected by the motion and light sensors (light turns off automatically when you stop your ride). The stay-on function continues flashing while you're paused while riding to ensure safety during traffic stops. Even if the battery runs out, the reflector continues to ensure rear visibility. The TL-AU165 runs for 6 months without replacing the battery (when used for 30 minutes a day). - Includes mounting screw and SP-5 clamp that fits 23.5-27.2mm bars - Flashing run time: Approx 100 Hours
$80.99 $100.00 19% Savings
Be visible, day or night with the super-powerful Specialized Flux Expert Taillight. It delivers 110 lumens for visibility over a 1/3 of a mile in broad daylight. Four modes: Standby, Surge Glow, Daytime Flash, and Nighttime flash let you adapt the Flux for your ride. It features a long lasting lithium ion battery and flip-out USB charger for added convenience. And, the Flux Expert features an ambient light sensor that drops flash level by 50% in total darkness for courtesy to other traffic. This excellent light features a quick-release, dovetail mounting system that fits on almost any seatpost.
Replacement Part – Universal Rack Mount - Fits all Serfas tail lights (Except TST-70, TST-100, & TBT-50R) - Bolts to rack for easy removal of tail light
Replacement Part – True Series Remote Headlight - Safety conscious – operate your light without removing your hands from the handlebars while riding - Waterproof connection to USB port Allows for remote operation of: TSL-950F TSL-700F TSL-450F TST-70 TST-100 TST-150 TBT-50R TBT-120F
$21.99 $27.00 19% Savings
Unlock all the functions of the Flux light with this two button remote. • Compatible with both the Flux Expert and Elite Headlights. • Lights up while the Flux headlight is on and repeats the Mode button and adds the Highbeam button (see Flux Headlight Manual for details) • Note: The remote is a "slave" unit and can turn a Flux headlight off but does not operate until the headlight has been turned on using the main button on the headlight.
Light & Motion's Vis 360 is a sleek, lightweight helmet light system that's perfect for cyclists that demand on-the-road visibility from all angles. Featuring: • 120 Lumen output certified to the FL-1 Standard. • Engineered with top of the line CREE LEDs and enhanced firmware. • Single LED front light and an array of 3 LEDS on the back. • NEW: Toggle the rear light on/off. • Accurate battery status indicator with 4 status levels. • Custom engineered reflectors and optical solutions optimize the light to distribute white, amber and red light 360 degrees. • Amber Side lighting for a complete 360 degrees of visibility. • Quick and easy snap On/Off helmet mounting system (tool-free design). • MicroUSB rechargeable (fully charges in 5 hours). • Low battery warning and auto shut-off to prevent damage. • Multiple power settings. Runtime/Lumens: • High 2:00/120 • Med 5:00/60 • Pulse 14:00/60
NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side “gills” that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. Side lights Economical, high output light Super bright flash setting ideal for daylight use Easy operation battery operated (comes with 2 x AA) 3 light settings – High, Low and Flash Lumen Output: 150 Run Time: 18:00 – 72:00hrs Weight: 175g Battery: Alkaline AA x 2 WARRANTY The Mako 150 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES LED Light Head Handlebar Mount 2 AA Alkaline Batteries
Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty
-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams
Serfas' TSL-LT1000 is a lightweight, compact headlight with 1000 lumens for phenomenal illumination. The CNC aluminum body is tough and features Serfas' Ram Air Cooling design to prevent overheating. Five different modes let you fine-tune your output, and the included handlebar and helmet mounts let you position it where you need it. • 1000 lumen output • Extremely compact battery pack • Ram-Air Cooling for a longer and brighter light output • Included: handlebar and helmet mounts • Optional remote switch (Sold separately) • Weight: 253 grams with bracket • Modes: overdrive, high, medium, low, and flash • Battery: 2-cell lithium-ion, 2600 mAh
Features: - 20 super bright red COB LEDs - 4 Modes: High (1.5hrs), Mid (4.5hrs), Flash (5hrs), Patrol (5hrs) - Li-ion rechargeable battery with Easy Magnetic USB charger (1.5 hrs charge time) - 20 lumens - Waterproof - Includes magnetic jersey clip - Optional integrated mount designs - 57093- D-Fuse seatpost mount - Integrates with the following Giant and Liv helmet models: -- Roost/Coveta -- Strive/Lanza -- Prompt/Unica -- Compel/Luta
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
Giant's Numen TL1 5 LED Taillight boasts 5 bright LEDs so you get noticed out on the road. If that wasn't enough, you have 4 modes: steady, flashing, patrol, and random modes for high visibility in traffic. And it runs for up to 180 hours. This great water-resistant light also sports 2 mounting options.
Night Crawler light uses a versatile band so it can be used as an ankle strap or installed on different objects like a helmet or bag. - Adjustable band wraps around an ankle, arm, helmet vents, or bag straps - Steady and Flashing light modes - Run time: 15 hours steady mode, 30+ hours flashing mode - CR2032 batteries included
Smarter seeing. Aside from the outstanding light output and industry-leading usage time, the Giant Recon HL900 increase the SpeedBeam technology, which adjusts light beam output based on riding speed; also features a light sensor to monitor ambient light source to change light output; these features help save battery power for when you need it. Brighter, longer and smarter. - SpeedBeam feature adjusts light output based on riding speed - Smart Mode light sensor monitors ambient light to adjust light output day or night - Pair with Garmin series computers and see the battery information and light mode on the computer screen - Lumens and runtime are ANSI-Standard certified - Focused optics with side light design for over 270-degrees of visibility - Heat-dissipating CNC-machined aluminum structure - Power status indicator alerts remaining run-time before powering off - Includes adjustable GoPro mount SPECIFICATIONS - Sizes: 105x28x30 mm - Weight: 108g without mount - Colors: Black - Output: 900 lumens - Runtime: High (900LM) 1.6hrs, Middle 4.5hrs (450LM), Low 10hrs (150LM), Smart (450LM with flash output in Day) 24hrs; (450LM with steady output at Night) 2.8hrs, Flash (100LM) 50hrs - Battery: Li-Ion polymer battery (3000mAh) - Waterproof: IPX6 - Certifications: ANSI-Standard FL-1
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
- 32 lumen single LED safety light - 2 modes - steady and flashing - 2 CR2032 batteries included - Water resistant design
The NiteRider Lumina OLED 1200 Boost is an innovative bike light that removes the guesswork related to battery life, allowing you to plan your next ride safely with complete confidence, day or night. The OLED multifunctional digital display screen delivers precise battery run times as a percentage and actual time for the Lumina OLED's 9 lighting levels. The Lumina OLED 1200 Boost features a custom engineered collimator sense, producing a generous widespread beam pattern. With Boost Mode providing a stunning 1200 lumens of maximum light output, this makes the Lumina OLED highly capable for use when navigating through diverse riding conditions. - New Collimator Lens, distributes a generous even widespread beam - Boost Mode! Unleash maximum LED output - 5 Light Levels plus 4 Daylight Flash Modes - CREE LED at 6000k - Multifunctional OLED screen provides detailed operational information - FL1 Standard IP64, water resistant - Intellicharge – Reduce charge time in half! - Backlit buttons for easy to use interface in any lighting condition - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Convenient USB rechargeable WARRANTY - The Lumina OLED 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head with OLED Display - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable
An excellent 200 lumen option for nighttime riding. With a 200 lumen output, the lightweight (66 grams) Volt200XC is a solid headlight option for riders looking for the perfect combination of lumen output, weight, and price. The USB-rechargeable Li-ion battery provides 20 hours of flashing light, 10 hours of low light, or 1 full hour of high power lighting. The secure rubber hook closure is easily removable so you can keep the light in a riding jersey or commuter jean pocket during daylight hours. The on/off switch doubles as a battery indicator light, so you know when the light is fully charged. - Includes micro USB charging cable Features: - 200 Lumens - Easy to attach and remove rubber bar mount - Battery: Li-ion USB Rechargeable - Low battery indicator - Mode memory function Modes/Run Time: - High: Approx 1.5 Hour (200 Lumens) - Low: Approx 4 Hours (30 Lumens) - Flashing: Approx 20 Hours (100 Lumens) - Charging time: 3 hours via micro USB 2.0
The Loop 2-RC is born from the same sleek, compact design and eye-catching visibility as the Loop 2, but is now rechargeable! With just 1.5 hours of charge time, you get 15 hours (flashing) and 4 hours (constant) run time on the front light. Installs easily on all 22-32mm diameter bars. Get noticed with the Loop 2 series of CatEye lights. - Dimension: 28 x 28 x 27mm - Weight: 18 grams (light unit and battery) - Light source: White LED x1 - Battery: Lithium-ion rechargeable battery (80mA)
For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 35 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 35 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 35 employs a custom made, built in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options. - Daylight Visible Flash (DVF) - A wearable safety light – clip onto various straps, belt loops, etc. - Visible up to 1 mile - Internal reflector = visible if light on off mode - Easily replaceable AAA batteries - Super bright day time flash mode - Be Seen by cars = Be Safe - FL 1 Standard IP64, water resistant WARRANTY The CherryBomb 35 is backed by NiteRider’s lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seatpost Mount - 2 AAA Batteries
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
Aside from the outstanding light output and industry-leading usage time, the Recon HL1600 features SpeedBeam technology which adjusts light beam output based on riding speed. It also features a sensor that monitors ambient light to change beam output. These features help save battery power for when you need it. Brighter, longer, and smarter. - SpeedBeam feature adjusts light output based on riding speed - Smart Mode light sensor monitors ambient light to adjust light output day or night - Pair with Garmin series computers and see the battery information and light mode on the computer screen - Lumens and runtime are ANSI-Standard certified - Focused optics with side light design for over 270-degrees of visibility - Heat-dissipating CNC-machined aluminum structure - Power status indicator alerts remaining run-time before powering off - Includes adjustable GoPro mount SPECIFICATIONS - Sizes: 105x35x47mm - Weight: 204g without mount - Colors: Black - Output: 1600 lumens - Runtime: High (1600LM) 1.5hrs, Middle 4.5hrs (800LM), Low 10hrs (300LM), Smart (800LMwith flash output in Day) 50hrs; (800LM with steady output at Night) 4.5hrs; Flash (100LM) 100hrs - Battery: Li-Ion polymer battery (6000mAh) - Waterproof: IPX6 - Certifications: ANSI-Standard FL-1
$23.25 - $33.00 $31.00 - $33.00 Up To 30% Savings
Giant's Numen+ Spark Mini 15 LED Taillight boasts 15 bright red LED lights that are sure to catch the attention of others on the road. It produces 20 lumens and features 5 different modes. A rubber strap makes it easy to mount and charging is just as simple, just plug it in with a micro-USB cable.
A bright and reliable urban bike light combo set. These lights provide cyclists with all the modes to stay bright as they pedal around town day or night. Beamer 80 specs: - High output surface mounted LED provides high power beam along with Courtesy and Superflash modes - FL1 run times: 6.5 hrs (steady – 80 lm), 24 hrs (Courtesy - 24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX5 standard - 2 AAA batteries (included) - A3 cam bracket mounts, adjusts or removes without tools - 63 grams Grateful Red specs: - PB 28 LED Power Array provide steady, Courtesy and Superflash modes - FL1 tested Run times: 26 hrs (steady – 13 lm), 45 hrs (Courtesy - 4-11 lm) and up to 150 hrs (Superflash - 13 lm) - Provide 160° of visibility - Highly visible, even in daylight - Water resistance rated to IPX3 standard - 2 AAA batteries (included) - Includes rear rack and seat post mounts plus rear clip for multiple mounting options - 85 grams
The NiteRider Sabre 80 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye catching visibility in both day and night. With the addition of amber colored side lights, the Sabre 80 provides 180 degrees of protection. Daylight Visible Flash (DVF) 80 lumen super bright tail light Easy on and off seat post strap mount with quick release tab Amber side lights for 180 degrees of visibility Convenient USB rechargeable Be Seen by cars = Be Safe FL1 Standard IP64, water resistant Lumen Output: 80 Run Time : 1:30 – 10:30hrs Charge Time: 1:30hrs Weight: 28g Battery: Li-Po WARRANTY The Sabre 80 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES LED Tail Light Seatpost Mount USB Cable
Be prepared on the road with Endura's Seat Pack. It holds an inner tube, levers, CO2 cartridge, and has an external pocket for your multi-tool. A wide neoprene strap with Velcro attaches this durable pack to your saddle. Plus, waterproof zippers keep your essentials dry in the rain while the Luminite LED light enhances your visibility in low-light conditions. • Size: 430 cubic cm • 1 LED light
The Recon HL500 is the perfect multi-function light for use on handlebars or helmets. It features abundant light output in a lightweight design. - Lumens and runtime certified to the ANSI-Standard - Focused optics with side light design for over 270 degrees visibility - Heat-dissipating CNC-machined aluminum structure - Power status indicator can let you know how much run-time to go before powering off - Includes adjustable GoPro mount SPECIFICATIONS - Sizes: 85x26x34mm - Weight: 81g without mount - Colors: Black; Gray; Blue; Red - Output: 500 lumens - Runtime: High (500LM) 2hrs, Middle 4hrs (300LM), Low 10hrs (100LM), Flash 100hrs, SOS: 100hrs - Battery: Li-Ion polymer battery (2000mAh) - Waterproof: IPX6 - Certifications: ANSI-Standard FL-1
Features: - Up to 20 lumens ANSI standard approved - Runtime: Day mode 4 hrs., High 8 hrs., Middle 15 hrs., Flash 30 hrs. - Li-Po rechargeable battery - Low power indicator - Motion sensor include - IPX4 waterproof rating - Charge via Micro USB cable
Page 1 of 2 Next page