Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.
Precision CNC machined aluminum tool for the installation and removal of 16-notch external bearing bottom brackets. Featuring updated tooth profiles to optimize the fit between the tool and high performance BB parts. Anodized and laser engraved for easy identification and featuring a ratchet/torque wrench compatible 3/8-inch drive. - 16-notch 39mm OD cups - Fits: Shimano XTR BB93, Dura-Ace BB9000, Token - Added depth to fit Shimano STEPS square drive motor
Speed Degreaser makes sprucing up your steed easier than ever! This amazing cleaner is formulated using the latest advances in cleaning chemistry. Its fast-drying formula cleans with no scrubbing, no rinsing, and no residue to wipe off. It's perfect for all the metal surfaces on your bike. It even displaces water, so it's the best way to treat your bike after messy rides.
Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any. - Great for frozen crank bolts, seized seat posts and rusty chains and derailleurs - Includes oils and rust inhibitors to provide lubrication and protection after use - Use: Spray the rusted part for 10 to 20 seconds and wait 2-3 minutes for the release agent to fully wick in and break the rust. For severe rust-welded parts, spray 30-60 seconds for maximum freezing effect and wait ten minutes to one hour for thorough break-down of rust. When rehabbing a bicycle chain, soak one small section at a time.
Lubing your bicycle's chain is an essential but messy task. But now, thanks to Finish Line's No Drip Chain Luber, you can oil your chain perfectly without making a mess. Just add your preferred chain lubricant (sold separately) and you'll have your chain lubed in just seconds flat. Not only does it keep things tidy, it saves you chain oil, making sure that not a drop is wasted.
Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.
$142.95 - $225.95
Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.
Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for comfort, the Park Cable Stretcher is a must for any serious mechanic.
• Secure engagement, easy to use, and fast! • The CP-1 quickly grips cogs from 9 to 24 teeth with no manual adjustments • A great shop tool, the CP-1 is 13.7" (35cm) long and can be used with one hand to hold cassettes solidly during lock ring removal • Forged steel construction with a spring loaded return and comfortable dual density grips.
Park's Essential Tool Kit contains the tools needed for many basic adjustments and repairs at home and on the road/trail. The compact, ready-to-go tool wallet includes: 3, 4, 5 and 6mm Allen wrenches, 2 TL-1 tire levers, a VP-1 patch kit, a flathead screwdriver (as part of the Allen set) and a small adjustable wrench.
Park's FR-1.2 Freewheel Remover fits Shimano freewheels made since 1985. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Precision CNC machined aluminum tool for the installation and removal of 12-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - 46mm 12-notch OD cup - Race Face® Cinch™, Rotor® BSA30, Zipp® Vuma™, Hawk Racing™ BB3086™, and more
To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!
Shop quality, adjustable torque driver that limits torque applied to fasteners, preventing over tightening and damage to lightweight components. The ATD-1 features all metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at our factory in Minnesota. - Adjustable to 4, 4.5, 5, 5.5 or 6 Nm - ¼ inch hex drive - Includes 3, 4, 5mm and T25 bits stored in the handle - Limits torque applied to fasteners while rotating clockwise - All metal internal construction for long life
Save the saddle bag for a snack and Swiss army knife. These patented, composite tire levers slide into the end of drop bars, staying hidden, yet fully functional. - Composite construction - 16g each
Topeak's sleek FlashStand FAT is a super parking/display stand that folds up for pocket-sized portability. This affordable, lightweight wonder securely holds your mountain bike by the non-drive side crankarm to keep it upright and safe. Take it along in your jersey pocket for those quick pit stops, too!
The Ninja C chain tool stores inside your handlebar to keep the uncluttered lines of your bike, yet can be easily accessed when you need it. This 11 speed compatible chain tool includes a chain pin compartment, chain hook, and 4mm Allen wrench for easy operation. - Added Features: rivet anvil for 11 speed Campagnolo hollow pin, secondary chain link fence, chain pin breaker, chain pin compartment - Allen Wrench: 4 mm - Body: Lightweight aluminum - Chain Hook: Hardened steel - Chain Tool: Hardened steel - Limitations: Road handlebar with minimum 70mm straight section end, fits inner ø16.5 - ø20 tube - Mount: Handlebar ends - Size: 8.6 x 2.3 x 2.3 cm / 3.4” x 0.9“ x 0.9” (Chain tool), 8.5 x 2.3 x 2.3 cm / 3.3” x 0.9“ x 0.9” (Chain hook) - Speed: Multi-speed chain up to 11 speed hollow pin chain - Weight: 77 g / 2.72 oz
Perfect for trailside repairs and for your home shop, Topeak's Universal Chain Tool is compatible with all chains and removes and installs pins with ease. Plus, there's even a compartment to hold spare pins, an integrated chain pin breaker and a removable chain hook to hold your chain while you work.
Keeping with the stealth ethos of the Ninja series, the Ninja Pouch+ Road conveniently holds a spare tube (up to 700 x 25c) in an inconspicuous area keeping the clean lines of your bike. Easy access to the integrated tire levers makes changing a tube a quick proposition. - Material: Cage-Engineering grade plastic; Bag-EVA foam - Cage Outer Diameter: Fits standard water bottle - Tire Levers: 2 engineering grade plastic levers - Compatibility: Up to 700 x 25c inner tube - Size: 18.5 x 10.8 x 7.8 cm / 7.3” x 4.3” x 3.1” - Weight: 101 grams - Inner tube not included
Add to your bike's longevity with Giant's Liquid Silk+ Teflon. This high-function, Teflon-based spray lubricates chains, derailleur pulleys, clipless pedals and more to minimize friction and eliminate rust. And, it has no oily build-up to attract dust and dirt.
$11.00 - $15.50
Recently named VeloNews Editor's Pick for Best 3-Way Wrench, Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body for strength and long-lasting performance. The ergonomic shape provides excellent leverage and easy handling.
Checking your chain for wear is one of the simplest things any cyclist can do to maintain drivetrain performance and minimize maintenance costs. The Pedro's Chain Checker Plus makes this task quick and easy, offering a simple worn/not-worn measurement which tells you if your chain should be replaced. To ensure the maximum life from your chain and accuracy of measurement, Pedro's implemented a three-point design which properly isolates pin wear from roller wear. Other two-point designs do not, and can incorrectly indicate a worn chain, robbing the user of additional miles and money. Not content to offer only chain wear functionality, Pedro's included a chain hook tool, perfect for simplifying chain removal and installation, and a chainring nut wrench, essential for removal and installation of chainrings. - Precision laser-cut design accurately measures 0.75% chain wear - Three-point chain-wear tool design properly isolates pin wear from roller wear - Chain-hook tool and chainring nut wrench add functional versatility and value
Pedro's socket tools provide the professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Working closely with each manufacturer, Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic. The External Bottom Bracket Socket is designed to work seamlessly with Pedro's snap-channel Pro Socket handle, with any 24mm socket/wrench, with any square 1/2" drive, or in a bench vise. The Pedro's External Bearing Bottom Bracket Socket fits 16-notch external bearing bottom bracket cups, including: Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, Race Face, FSA, SRAM, Truvativ, Chris King, and Phil Wood outboard bearing. - Fits all 16-notch external bearing bottom bracket cups - Designed to work with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, a square 1/2" drive, or in a bench vise
Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?
Portland Design Works' 3wrencho is a strong and versatile addition to your fixed gear, townie or workbench! Made of heat-treated steel for extra toughness, it's part tire lever, part 15mm wrench. Its strong nylon coating won't scratch rims, so you can pry as hard as you need to remove stubborn tires. Step on the 3wrencho for extra leverage to loosening axle nuts. May also be used to spread peanut butter, stir a drink, or open a letter. - Length: 114 mm (4.5") - Weight: 95 g (3.5 oz)
- Handy tool to have to easily install your KMC MissingLink. - Easy to handle! - Very comfortable!
Our first multi-tool includes all the key bits to assemble and disassemble your bike on-the-go. Includes a 15mm and 17mm swappable pedal wrench, 4, 5, 6 and 8mm hex wrenches and a 17mm socket with an integrated storage compartment. The Travel Tool is light and easy to carry, but big enough to allow you to actually tighten everything down properly. Features: - 4mm, 5mm, 6mm, and 8mm hex wrenches - 17mm deep socket - Integrated storage compartment - Pedal Wrench (15mm and 17mm spanners included) - 8-inch Full length arm for proper leverage
The Easy-Pro Brush Set includes 5 different brushes that make easy work of all bike-cleaning jobs. Use them to remove mud, dirt and road grime from your frame and components. The package comes with a features-and-benefits guide that explains the multiple uses of each brush. Also included is a chain for hanging the brushes when they're not in use.
• 5/6mm hex wrenches
This ergonomically designed grease gun delivers comfortable precision lubing. With one-hand operation and a long-reach tip, it's an easy, clean, quick way to get the slippery stuff where you want it. It screws onto all standard tubes of grease with 9/16-inch heads (sold separately).
Page 1 of 4 Next page